UAV gimbalsInfinity MR-S2
€894.31 ex.Vat | €1,100.00 in.VAT
InfinityMR-S2 is a light, powerful gimbal for Sony A6500 size cameras. Thanks to its smart design and top-quality materials, it is only 560g, what makes it one of the lightest gimbals in this class! Built-in slipring connector allows for clean wires routing and saves additional weight (as you don’t need to use a separate battery for the gimbal only). AlexMos controller with encoders delivers the best quality stabilization both in the underslung and inverted modes.
NOTE: If you have a valid VAT number or you live outside the European Union, you don’t pay VAT tax.
- Additional information
- 3axis IMU and encoder based stabilized gimbal
- Underslung and inverted mode
- Built in slipring with 4 wires for additional devices
- Operating voltage: 3-6s lipo
- Reinforced carbon fiber for best rigidity and lowest weight
- Basic water and dust resistance
- Dedicated encoder motors
- AlexMos 32bit controller
- Ready to use, initially tuned out of the box
- MAVLINK protocol support
Starting from firmware version 2.60, SimpleBGC32 controller used in InfinityMR-S supports connection to an external flight controller (FC) using MavLink protocol. This protocol is used for connecting autopilots to a ground station (GSC) and OSD telemetry.
MavLink support was tested with the popular open-source flight controller ArduPilot: www.ardupilot.org
Benefits of connecting the gimbal to FC:
a) correcting of the gimbal IMU sensor
b) controlling gimbal automatically
c) remote editing of gimbal’s parameters
d) obtaining data from the RC receiver
Infinity MR-S gimbal supports cameras up to 900g/ 19.8lb, such as: Sony A6500; Sony A6000 and all similar.
|Dimensions||18 × 18.1 × 25.3 cm|
1 review for Infinity MR-S2
April 20, 2020 at 11:58 am