Stabilized headsElit Stabilized Head

Rated 5.00 out of 5

Elit is a stabilized head with zoom-focus support dedicated for the cinematography cameras up to 20 kg/44 lb. Elit can be successfully used in many different applications, such as: cranes, cars, boats, ATV quads and many others.
Choosing Elit  Advanced Combo + zoom-focus controller, you’ll get:

  • Elit stabilized head x1
  • Remote cable controller x1
  • Zoom-Focus box for Canon-Fujinon broadcast lenses x1
  • Yaw axis Mitchel mount x1
  • Camera bridge plate x1
  • 19mm rods x4
  • Transport cage x1
  • Camera bolts
  • 24 months warranty
  • Customer support
  • Training

NOTE: If you have a valid VAT number or you live outside the European Union, you don’t pay VAT tax.

We produce this gyro head on your request. Get in touch to arrange all the details via CONTACT FORM

This product is currently out of stock and unavailable.

  • Description
  • Additional information


Elit has been designed and built by experienced team of engineers, specializing in the drone gimbals production since 2010.
Elit can also work in different weather conditions in temperatures from -10 up to +50 Celsius, what makes it a perfect option for projects in even the most challenging weather conditions.

  1. Weight including top and bottom camera plate (w/o battery): 12.2 kg
  2. Maximum payload 20kg/44lb [1]
  3. Camera cage internal dimensions: 315mm x 309mm x 381mm (Height x Width x Depth)
  4. Hollow shafts in all axis (tilt, roll, pan) make wires routing easy.
  5. Pan axis hollow shaft allows to pass fibre/triax connector of 23.5mm diameter
  6. Voltage: 22-25.3V 10.000-30.000mah battery (6S lipo recommended) or 24V DC power supply
  7. Quick and easy tool-less balancing in each axis
  8. Built-in AHRS with GPS prevents horizon drift for automotive shots [2]
  9. IMU (gyroscope and accelerometer), 3 absolute encoders on each axis and 32bit main processor are responsible for fast reaction to any external factors disturbance (like car shakes, crane shakes, etc.).
  10. Axis working range:
  • Tilt: +90/-140
  • Roll: +60/-60
  • Pan: continuous 360
  1. 4 direct drive brushless motors with encoders are responsible for high torque and speed of movement.
  2. Fixed stabilization (always pointing one direction)
  3. Built-in voltage regulators to power external devices (camera, follow focus, wireless vision, etc.):
  • 1x 12V/10A (D-tap connector)
  • 2x 12V/5A (D-tap connector)
  • 1x 5v/4A (D-tap connector)
  1. Reinforced aluminum 6061 T6 and carbon fiber composite construction allows to get best quality stabilization even in the hardest terrain and weather conditions.
  2. 2 seconds boot time.
  3. Safety motors switch.
  4. Lock mechanism on tilt and roll axis for easier balancing and setup.
  5. Internal wires routing helps in operation and initial camera setup.
  6. Camera bridge plate with dovetail plate included.
  7. Pan axis Mitchell mount allows to mount Elit almost on any rig (telescopic-cranes, speed dollies, shock absorbers).
  8. Underslung and overslung mode supported.
  9. Transporting cage included.
  10. Remote controller supports cable connection with a head and control over head and zoom-focus of new and old Canon and Fujinon broadcast lenses (12pin and 20pin connector).
  11. Cable lenght: 25m as standard (can be extended to 100m on customer request)
  12. Remote controller functions:
  • 3 axis high precision hall sensor joystick to control tilt, roll an pan axis
  • Joystick speed adjustment
  • Joystick “smooth start-stop” adjustment
  • Motors start/stop
  • Boot sequence restart
  • Tilt/Pan joystick revers
  • Camera profiles switch (5 different profiles for different camera weights)
  • Motors strength
  • Stabilization gain
  • Tilt and roll axis level position switch
  • Canon/Fujinon broadcast lens zoom control
  • Canon/Fujinon broadcast lens focus control
  • Zoom speed
  • Focus speed, focus range (low and high position)
  1. Applications:
  • Telescopic cranes (Scorpio, Supertechno, Moviebird, etc.)
  • Fixed cranes
  • Speed dolly
  • Tripods
  • Camera cars
  • ATV
  • Many other… [3]

[1] For high speed dynamic shoots it is advised to use payload not heavier than 15kg and maximum length of 62-65cm.

[2] Not required for studio shots (technocrane, fixedcrane, dolly) with speed less then 7m/s

[3] Broadcast type of applications allows to get best stabilisation performance with almost all variety of broadcast cameras with maximum zoom length. Stabilisation performance in automotive type of applications depends on absorbing systems, terrain, camera-lens weight and lens focal length.

Additional information

Camera cage internal dimensions

309mm x 315mm x 381mm (Height x Width x Depth)

Weight (battery excluded)


Power source

22-25.3V 10.000-30.000mah battery or 24V DC power supply
Reinforced aluminum 6061 T6 and carbon fiber composite construction allows to get best quality stabilization even in the hardest terrain and weather conditions.
To power Elit 6S lipo or 24V external power adapter is required. You can use any 6S lipo battery with minimum 10.000mah capacity and 10C power rate. We suggest to use 6S 12-22 Ah lipo battery with XT90 power connector.

1 review for Elit Stabilized Head

  • jerry qin

    February 26, 2022 at 8:34 am

    5 out of 5

    Elit Mini Head
    Head weight: 6.3 kg (13.8 lb)
    Axis: 3
    Gyro head with zoom-focus support for broadcast box cameras up to 8 kg/17.6 lb. Comes with a rich set of accessories, so, unbox and go on the set!——————————–HI , We want to buy an gimbal head which can use a broadcast camera onto it , do you have some to recomand ? also tell me the price , thanks.


Add a review

HD Air Studio UAV gimbals
HD Air Studio creates the best aerial gimbals and gyro heads for industrial and cinematography use. Not a single return in 10 years!

Say hello to us


© 2022 HD Air Studio

Select your currency